Oil temperature direct gauge for KTM 620 640 LC4 96-06 JMP 23x3,00mm black

Fully synthetic 4-stroke high-performance engine oil in the usual high Motorex quality. Specially developed for the demanding use in motorbikes with powerful engines. Provides better protection in engine, Transmission and clutch a better protection in the entire range of application Optimised power development Improved wear protection Ideal for oil bath clutches (JASO MA2 release) Specifications: JASO MA2 API SM, SL, SJ, SH, SG About Motorex Motorex is a Swiss premium oil manufacturer which was founded in 1917. Known for some of the highest quality oils on the market, Motorex is represented in more than 85 countries worldwide and works with countless motorbike manufacturers and racing divisions. Environmental information and disposal:After use, motor oils should be disposed of at a used oil collection point. For proper disposal, you can send us your used oil up to the quantity you purchased from us (according to the invoice) for free and proper disposal or hand it in personally (arrange an appointment in advance). The oil must be returned in its original or equivalent packaging, without any foreign substances such as brake fluids, coolants or solvents. As Altoel is a dangerous good, there are special shipping regulations! The costs for this are to be borne by the purchaser. Improper disposal of aluminium oil endangers the environment!

Complete oil filter kit with high-quality Hiflofiltro oil filters, suitable for KTM 400 620 640 LC4 and 660 SMC models with large oil circuit (not for 620 LC4 Super Competition with micro filter). In addition to the required oil filters, the set contains the correct oil filter seals and gaskets, which should be routinely replaced when changing the oil. The set consists of Hiflofiltro oil filter HF156 (screw filter) & HF155 Athena paper gasket oil filter cover 1 copper sealing ring 8x12x1,5 (for oil lines) 1 copper sealing ring 10x14x1,5 (for oil lines) 3x copper sealing ring 8x12x1 (for oil lines) 1x copper sealing ring 12x18x1,5 (for oil drain plug with magnet) 7x copper sealing ring 10x14x1 (for oil lines) 1x copper sealing ring 22x27x1,5 (for large oil drain plug) O-ring 55x2,00mm NBR70 (for old oil filter caps before 2002)   Quality is important to usOur proven oil change kits rely only on high quality Hiflofiltro oil filters, as they are the only oil filters with TUeV certification. The filters are tested to ensure that their quality and workmanship is at least equal to that of the original oil filters. Hiflofiltro filters always maintain the quality level of the original oil filters or even perform better in tests.   Environmental information and disposalAfter use, engine oils should be disposed of at a scrap metal collection point. For proper disposal, you can send us your used oil up to the quantity you purchased from us (according to the invoice) for free and proper disposal or hand it in personally (arrange an appointment in advance). The oil must be returned in its original or equivalent packaging without any foreign substances such as brake fluids, coolants or solvents. As Altoel is a dangerous good, there are special shipping regulations! The costs for this are to be borne by the buyer. Improper disposal of oil endangers the environment!

High quality replacement oil filter kit, suitable for KTM 400 and 620 LC4 models with small oil circuit (e.g. Super Competition and SXC). The original microfilter, which is no longer available, has been replaced in this set by a replacement paper oil filter which fits into the original microfilter housing without any adjustments due to the same dimensions. The set consists of Hiflo Oil Filter HF155 NT Replacement Oil Filter for Microfilter (reference number 58038044000) Athena paper gasket oil filter cover (depending on version) 3x O-ring 55,00 x 2,00 NBR70 for micro filter cover and some versions of the oil filter cover 7x copper sealing ring 8x12x1 (for oil lines) 3x copper sealing ring 10x14x1 (for oil lines on the oil filter cover) 1x copper sealing ring 8x12x1,5 (for connection at the clutch cover) 1x copper sealing ring 12x18x1,5 (small oil drain plug) 1x copper sealing ring 22x27x1,5 (big oil drain plug) The set includes all Oil filter seals and copper sealing rings on the oil lines, which should be routinely replaced when changing the oil.   Environmental notes and disposal After use, engine oils should be disposed of at a waste oil collection point. For proper disposal, you can send us your used oil up to the quantity you purchased from us (according to the invoice) for free and proper disposal or hand it in personally (arrange an appointment in advance). The oil must be returned in its original or equivalent packaging without any foreign substances such as brake fluids, coolants or solvents. As Altoel is a dangerous good, there are special shipping regulations! The costs for this are to be borne by the buyer. Improper disposal of oil endangers the environment!